Snoopy

Details

Laser: Eleksmaker 2.5w
Software: LightBurn
Wood: Plywood 1/2 in
Project dimensions: 4×4 in
Time: 3x 16 minutes (48 minutes)

Result

SpeedPowerDPINotes
Vector600 mm/m70%84 (0.3)Fill speed: 600
Border speed: 800

Good results with high contrast

Note: The image was from a google search for personal use only.

Lessons Learned

Slow Speed. By using cheap plywood (sanded smooth), there is a lot of veines which burn unevenly. Using a slow speed and high power was the only way to burn over those and give a uniform design. This would NOT work for dithered image / photo.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top